FOTEK CONTROL Automation

Model:LA4-24L
Beams:24
Protection high(mm):920
Beam pitch:40 mm
Setting disrance:Standard range: 0.2m~6.0m or Long range: 0.5m~12.0m selectable
Sensible object:Opaque object 45Φ min.
Operating voltage:24±20%VDC;Ripple ±20%P-P max.
Current consumption:8.0 mA/beam max.
Output method:NPN & PNP two way output
Output current:100mA max.
Outpur status:All light channel light NO (NO/NC changeable)
Protection circuit:Short circuit & polarity reversed protection
Residual voltage:0.8 V max.
Leakage current:0.8mA max.
Response time:10 ms msx.
Reset time:Output reset time < 200ms
Illumination:Lamp < 10.000 LUX ; Sunlight < 20.000 LUX
Protection class:IP-65
Connection method:Tx:2c-4Ψ-3m:Rx:4c-4Ψ-3m
Housing method:Housing:Aluminum;END CAP:PBT:Front cover:ACRYLIC
Circumstance:0ºC~50ºC;25%~85%RH
Vibration resistance:10~55 HZ/1.5 mm , 2
小時/X.Y.Z 方向
Classifcation:CE MARK
EMC Stamdard:ESD:8KV Air charge (level 3)/EN-61000-4-2;Burst test:2 KV/EN61000-4-4 RF Interference:10 V /M /ENV50140

www.photosensor.com.tw